How To Update Mi 3C Router Manually.

How To Update Mi 3C Router Manually.

Facing any problem while updating your Mi 3C Router to the latest Firmware?
In this guide, i’ll show you how you can flash the firmware in Mi 3C Router Manually. All you have to do is follow this guide step-by-step.

Lets Get Started

  • First of All Download the File From The Link :
    Mi 3C Router Firmware
  • Mi3C Download
  • Step-1
  • Visit http://miwifi.com/ or 192.168.31.1 or 192.168.1.2.
  • 00
  • Step-2
  • You’ll arrive at Mi Router’s Dashboard. Now, press the setting button in the navigation area.
  • 01
  • Step-3
  • After arriving at settings, press the status button from the submenu and you’ll arrive at a screen below.
  • 03
  • Step-4
  • Press the Update Manually Button, Browse to the firmware file and select it.
  • 04
  • Step-5
  • Press and Update Now Button, It will redirect you to the following Screen.
  • 05
  • Step-6.
  • At this step, all you have to do is wait. All Your Devices will get disconnected to Mi Router and an orange LED will Start Blinking during the update process. This process could take approximately 7 minutes. Once the Router’s LED Turns Blue you can connect all your devices back to Mi Router and if you will refresh the above page Mi Router Will Show you the latest Version under the Version Heading.
  • I’ve also attached the latest firmware file in the thread.
  • If you face any issue do reply below and I’ll get back to you as soon as possible.

Here Is the full video
How To Update Mi 3C Router Manually.
[youtube https://www.youtube.com/watch?v=l1DepfjBKk4&w=560&h=315]
Thank You,
Regards:
Technomild.com

Leave a Reply

Your email address will not be published. Required fields are marked *